►Kit allows 5-Slot ShareCradles or 4-Slot + Spare Battery "toaster" to be retrofitted with mechanical lock to prevent unauthorized use/theft. ►User must authenticate on device (via PIN code or barcode scan) before locking mechanism will release it. ►ShareCradle with Locking Kit can be installed inside Intelligent Cabinet or can be placed on desk/counter. Can't be installed on Storage Racks. ►Includes software app for device that enables the locking mechanism. ►Typically used with Zebra Intelligent Cabinet solution but can also be integrated with other applications using SDK. ►Not compatible with Snap-On accessories attached (e.g. MSR, Trigger Handle etc…) ►Lock taps into ShareCradle's power supply (PWRBGA12V108W0WW) using included pigtail cable. ►Device communicates with the cradle lock by sending a series of light pulses at the top of its display. The correct sequence of pulses locks or unlocks the clamp/arm. ►Clamp/Arm operation details: - Clamp is held in place by gravity so the user has to physically raise the clamp to retrieve their device. - Clamp will then drop back down past the point where is would clamp a device. This lower position tells the clamp not to re-engage the lock. - The lock only re-engages when a device is present in the cradle and the clamp descends to the correct level.